LDS67系列數控電動螺旋壓磚機

?LDS67系列數控電動螺旋壓磚機是針對耐火行業特點，為耐火行業量身研制的耐火材料成型專用設備，在充分研究國內外電動螺旋壓力機的基礎上，結合耐火行業的工藝特點，通過多次結構設計、改進和完善而成的遼鍛第三代電動產品。 1.采用雙電機驅動、新型結構，具有封閉高度大、工作臺面寬、螺桿螺母受力狀態好等多種優點。具有控制先進、高效節能、運行安全、操作簡便、成品質量穩定、維護工作量小等多種特點。 2.采用PLC可編程程序控制器對兩臺開關磁阻電機進行控制，并配有人機界面，可根據制造工藝和成型精度設置打擊力。 3.適用于壓制粘土磚、鎂磚、鎂碳磚、水口磚、剛玉磚、尖晶石磚、鋁磚、焦油磚、滑板磚等多種耐火磚。

關鍵詞：

LDS67系列數控電動螺旋壓磚機電動螺旋壓磚機數控電動螺旋壓磚機耐火磚壓力機遼陽鍛壓遼陽鍛壓廠遼鍛

所屬分類：

LDS67系列電動螺旋壓磚機

LDS67系列數控電動螺旋壓磚機

遼鍛，一直致力于提升電動螺旋壓磚機的打擊力和打擊效率，2019年，通過充分的研究國內外的先進技術，并結合遼鍛多年的電動螺旋產品的設計經驗，研制出了LDS67系列數控電動螺旋壓磚機，產品在設計過程中利用了三維建模、有限元分析、大數據采集、數字化模擬等先進的技術手段，優化了產品結構，提升了使用性能。廣泛適用于生產粘土磚、鎂磚、鎂碳磚、水口磚、剛玉磚、尖晶石磚、鋁磚、焦油磚、滑板磚等多種耐火磚，LDS67系列電動螺旋壓磚機具有其他同類型產品無法比擬的優勢：?

Liao Duan has been committed to improving the striking force and efficiency of electric screw presses. In 2019, through thorough research on advanced technologies at home and abroad, combined with Liao Duan’s years of experience in designing electric screw products, the LDS67 series was developed. The CNC electric screw press uses advanced technical means such as three-dimensional modeling, finite element analysis, big data acquisition, digital simulation, etc. in the product design process to optimize the product structure and improve the performance. Widely applicable to the production of clay bricks, magnesia bricks, magnesia carbon bricks, nozzle bricks, corundum bricks, spinel bricks, aluminum bricks, tar bricks, skateboard bricks and other refractory bricks. The LDS67 series CNC electric screw press has Unmatched advantages of other products of the same type:

•The equipment structure is simple and practical, the transmission mode is stable and reliable,
the operation and maintenance are convenient, the equipment runs smoothly, and the noise is low;
•Split pre-stressed fuselage structure with good rigidity and high strength;
•Using the classic sliding block guide structure, the sliding block has a large aspect ratio,
strong anti-eccentric load ability, accurate and reliable guidance;
•Strike force and high efficiency;
•Advanced lubrication technology, the screw, copper nut, and thrust bearing are all lubricated with
thin oil;
•Full closed loop control, product consistency is higher than the industry level.